Do's and Don'ts for Tile Maintenance

Tile and Marble Maintenance Do’s and Don’ts

Posted on Posted in Blog
If you’re looking to make your tile and marble last, check out these essential Do’s and Don’ts for your tile and marble maintenance!

Do treat crackled or crazed tiles with a pre-grout coating finish. This will prevent the grout pigmentation from penetrating the cracks in the tile. (Generally, glazed tiles do not require sealing).

Do remember that unglazed tile usually requires pre-grout sealing. Penetrating sealer should be used for all areas

Aquamix Product Shots

Do use a grout additive and a grout release product when installing porcelain tiles — especially rustic finished products

Do use phosphoric acid for heavy duty cleaning of your grout. Grout will need to be resealed with a penetrating sealer after this cleaning.

Don’t use phosphoric acid on any natural stone or marble

Don’t use high-solid coatings (wax) on glazed, porcelain or quarry tiles since they tend to peel and will not bond as effectively.

Don’t use vinegar and water for cleaning tile. Vinegar is acidic and will damage grout and bleach its color. Bleach has the same effect on tile. A neutral cleaner is a better choice.

Don’t use muriatic acid — it is dangerous to people, tile, and grout. Phosphoric acid is a much safer alternative.

Don’t clean the surface of tile with abrasive cleaners or cleaning powders. They will wear down glazed and unglazed surfaces prematurely.

We hope that these tips will help you enjoy your new look for years to come! If you have any questions, or would like to know more, give us a call today!